描述
飒驰 Syachi NA150 是一款由腈纶纤维、纤维素纤维、各种填料以及丁腈橡胶作为粘合剂辊压制成的耐油的无石棉橡胶板.
Item 项目 |
Unit 单位 |
Value 阙值 |
|
---|---|---|---|
Identification color颜色 |
/ |
可定制各种颜色 |
|
Density 密度 |
g/cm3 |
1.95 |
|
Tensile strength抗拉强度 ASTMF-152 |
Mpa |
≥4.5 |
|
Compressibility压缩率 ASTMF-36 |
% |
7~17 |
|
Resilience回弹率 ASTMF-36 |
% |
≥30 |
|
Compressive creep strength应力松弛 |
N/mm2 |
≤30 |
|
Leakage rate ASTMF-37泄漏率 |
cm3/s |
1.5×10-2 |
|
Oil resistance /Thickness growth耐油增厚率 |
IRM903 oil 或 3# oil
149℃±2℃, 5h(ASTMF-146)
|
% |
≤12 |
ASTM Fuel oil B
21℃~30℃, 5(ASTMF-146)
|
% |
≤18 |
|
Working Temperature工作温度 |
℃摄氏 (℉)华氏 |
100~120 (212~248) |
|
Max Temperature (Instantaneous)瞬间温度 |
371(700) |
||
Applicable medium:Tap water, industrial water, seawater ,atmosphere, acid, alkali, oil. long-term usage temperature should be 100℃~120℃(212℉~248℉). |
注意:产品适用于自来水、工业水、海水、空气、一般的酸、碱、油等。使用温度应在100℃~150℃。(注:最大温度,不可能为实际长期使用的温度。颜色可有顾客自选,主要颜色有绿色、黄色、蓝色、黑色。可贴牌生产。)
1In area one, the gasket material is normally suitable subject to chemical compatibility.
2In area two, the gasket materials may be suitable but a technical evaluation is recommended.
3In area three, do not install the gasket without a technical evaluation. Always refer to the chemical resistance of the gasket to the fluid.
Dimensions of the Standard Sheets
Sizes: 1000 x 1500 mm, 1500 x 2000mm ,1500 x 4000mm,1500 x 4500mm , 1270*3810mm , 1270*1270mm Thicknesses: 0.5 mm, 0.8mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm, 4.0mm,5.0mm ; other thicknesses and sizes on request. Tolerances: thickness ± 10%, length ± 50 mm, width ± 50mm.
Function & Durability
The performance and service life of Saier gaskets depend in large measure on proper storage and fitting, factors beyond the manufacture's control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.