描述
飒驰 Syachi NA250 是由较高含量的芳纶纤维、其他复 合纤维以及丁腈橡胶作为粘合剂辊压制成的耐油的无石 棉橡胶板.能满足一般工业的生产要求。
Item项目 |
Unit单位 |
Value阙值 |
|
---|---|---|---|
Identification color颜色 |
/ |
可定制任何颜色 |
|
Density密度 |
g/cm3 |
1.85 |
|
Tensile strength抗拉强度 ASTMF-152 |
Mpa |
≥7.0 |
|
Compressibility压缩率 ASTMF-36 |
% |
7~17 |
|
Resilience回弹率 ASTMF-36 |
% |
≥40 |
|
Compressive creep strength应力松弛 |
N/mm2 |
≤30 |
|
Leakage rate ASTMF-37泄漏率 |
cm3/s |
1.5×10-3 |
|
Oil resistance /Thickness growth 耐油增厚率 |
IRM903 oil 或 3# oil
149℃±2℃, 5h(ASTMF-146)
|
% |
≤10 |
ASTM Fuel oil B
21℃~30℃, 5(ASTMF-146)
|
% |
≤15 |
|
Working Temperature工作温度 |
℃摄氏 (℉)华氏 |
250 (482) |
|
Max Temperature (Instantaneous)瞬间温度 |
400(752) |
||
Applicable medium:Tap water; hot water; Industrial water; seawater; atmosphere; steam; medium acid, medium alkali,fossil oil; oil. long-term usage temperature should be 250℃ (482℉). |
注意:主要用于空气、水、海水、热水、蒸汽、石油类油以及中等强度的酸碱。使用温度250℃。(注:最大温度,不可能为实际长期使用的温度。颜色可有顾客自选,主要颜色有绿色、黄色、蓝色、黑色。可贴牌生产。)
1. In area one, the gasket material is normally suitable subject to chemical compatibility.
2. In area two, the gasket materials may be suitable but a technical evaluation is recommended.
3. In area three, do not install the gasket without a technical evaluation. Always refer to the chemical resistance of the gasket to the fluid.
Dimensions of the Standard Sheets
Sizes: 1000 x 1500 mm, 1500 x 2000mm ,1500 x 4000mm,1500 x 4500mm , 1270*3810mm , 1270*1270mm Thicknesses: 0.5 mm, 0.8mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm, 4.0mm,5.0mm ; other thicknesses and sizes on request. Tolerances: thickness ± 10%, length ± 50 mm, width ± 50mm.
Function & Durability
The performance and service life of Saier gaskets depend in large measure on proper storage and fitting, factors beyond the manufacture's control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.